Premium British Marine Chemistry

Flagship · Galvarmor

Stop stainless seizing into aluminium.

Galvarmor is a PTFE marine anti-galvanic and anti-seize compound. It blocks the galvanic cell that corrodes aluminium fittings and shears rigging screws, so hardware undoes cleanly years later. Made in Britain.

BlueSyn Galvarmor marine anti-seize on a wet deck fitting at a marina
Anti-galvanic protectionSalt-water ratedMade in BritainPTFE reinforcedChandlery & trade supplyA Molevion brand Anti-galvanic protectionSalt-water ratedMade in BritainPTFE reinforcedChandlery & trade supplyA Molevion brand
Galvarmor PTFE anti-seize compound applied to a stainless rigging screw thread

The flagship

Marine anti-seize for stainless into aluminium.

Galvarmor · PTFE anti-galvanic & anti-seize compound

A stainless fastener in an aluminium fitting forms a galvanic cell the moment salt water reaches it. The aluminium corrodes, the corrosion product swells inside the thread, and the fastener locks solid. By the time it matters, the only way out is a drilled-out chainplate or a replaced mast fitting.

Galvarmor places a waterproof, non-setting PTFE barrier between the two metals at assembly. The circuit cannot form, the threads cannot gall, and the fitting undoes cleanly when you need it to.

  • Prevents galvanic corrosion between dissimilar metals, including stainless into aluminium
  • Prevents thread seizing and galling on assembly, with a PTFE film
  • Waterproof and non-setting, stays workable and does not wash out
  • For fasteners, rigging screws, chainplates, shackles, terminals and deck hardware

Galvanic corrosion explained

Galvanic corrosion, and how to stop it.

Cross-section: Galvarmor anti-seize compound between a stainless steel screw and an aluminium fitting
Galvarmor sits between the stainless fastener and the aluminium.
What stops a stainless bolt seizing in an aluminium fitting?
A barrier compound applied to the threads before assembly. Stainless steel and aluminium in salt water form a galvanic cell: the aluminium corrodes, the corrosion product expands inside the threads, and the fastener seizes. Galvarmor places a waterproof, non-setting PTFE film between the two metals so the circuit cannot form and the fitting undoes cleanly years later.
What is galvanic corrosion on a boat?
When two different metals are in contact in an electrolyte such as sea water, the less noble metal corrodes preferentially. On a yacht this is most often aluminium corroding where stainless fasteners pass through masts, chainplates, rigging screws, tracks and deck fittings. The visible white powder around a fastener head is aluminium already being consumed.
Where should anti-galvanic compound be used on a yacht?
On any stainless fastener entering an aluminium or dissimilar-metal fitting: shroud rigging screws, chainplates, mast fittings and track bolts, cleats, shackles, terminals and deck hardware. The application map further down this page covers the full vessel, point by point.
Will it wash off in salt water?
No. Galvarmor is waterproof and non-setting. It stays workable in the joint rather than drying, hardening or washing out, so the barrier remains intact through washdowns, spray and standing damp.
Can it be used on stainless, brass and bronze as well?
Yes. It is specified for the mixed metals found on deck, including stainless, aluminium and brass, wherever two dissimilar metals are in permanent contact in a marine environment.

The marine problem

Salt water finds every compromise in a formulation.

Marine fittings work in conditions that defeat ordinary grease. Spray and rain wash lubricant off. Standing damp corrodes metal. Winches take heavy loads, and pawls must return cleanly or the drum slips. General-purpose grease washes out within a season and corrosion starts underneath.

Galvanic seizing

A stainless bolt in an aluminium fitting forms a galvanic cell in salt water. The aluminium corrodes, the threads seize, and the fitting shears on removal.

Corrosion

Salt and damp attack winch spindles, sheaves, shackles and terminals. Rust starts under a failed film and the fitting fails.

Wash-out

Rain, spray and washdowns remove ordinary grease. Bearings run dry and need frequent re-greasing.

Sticky pawls

Grease on the pawls gums up the springs. A pawl that does not return lets the winch drum slip.

Formulation & technology

Built from the base oil up for the marine environment.

BlueSyn is developed in-house on more than twenty years of formulation practice. Every product in the range is built around the properties that decide whether a marine lubricant survives a season.

Film integrity

It stays where you put it

High-adhesion chemistry holds the film on exposed, wet, vertical surfaces. The grease resists water wash-out through washdowns and standing damp instead of emulsifying and running off.

Corrosion control

It protects the metal beneath

A barrier film with salt-corrosion inhibition, specified for the mixed metals found on deck: stainless, aluminium, bronze and brass in permanent contact with each other and with salt water.

Load & friction

It carries the load quietly

PTFE reinforcement in the winch and anti-seize grades lowers friction and smooths gear engagement under sheet load, without the tack that gums a pawl spring.

The range

Each product does its job properly.

Together they cover the routine lubrication points on a leisure vessel, from trailer bearings to the masthead. Grease the gears, oil the pawls, protect the fittings.

BlueSyn Galvarmor PTFE anti-galvanic anti-seize compound
CompoundFlagship

Galvarmor

PTFE anti-galvanic / anti-seize compound

A PTFE marine anti-seize for dissimilar-metal fittings, such as stainless fasteners in aluminium. Forms a waterproof, non-setting barrier on threads and contact faces so fittings undo cleanly years later, preventing galvanic corrosion and seizing.

Technical data

Type
PTFE anti-galvanic
Function
Anti-seize · anti-corrosion
For metals
Stainless, aluminium, brass
Texture
White paste

MOL-BL-00005

BlueSyn Marine Grease on a teak deck beside a winch
GreaseAvailable

Marine Grease

Water-resistant marine grease · NLGI 2

The core grade of the range. A water-resistant grease for bearings, shafts, pivots and trailer hardware that resists wash-out, protects against corrosion, and holds its film through washdowns and standing damp.

Technical data

NLGI grade
2
Water resistance
Excellent
Corrosion protection
Excellent
Adhesion
High

MOL-BL-00004

GreaseNew

Marine Grease Pro

Heavy-duty marine grease · NLGI 2

A water-resistant grease for loaded components in demanding wet or saltwater-exposed service: bearings and mechanical parts that see high loads, high temperatures, or fresh or salt water getting in. No added PTFE.

Typical values

NLGI grade
2
Operating temperature
−30 °C to +180 °C
Dropping point
>300 °C
Water wash-out
<2% (30 h, 60 °C)
Saltwater wash-out
<2% (30 h, 60 °C)
Weld point
>500 kg
Colour
Dark brown

Typical values, not specifications. SDS and TDS available.

BlueSyn Marine Winch Grease on a teak deck beside a sheet winch
GreaseNew

Marine Winch Grease

PTFE winch grease · NLGI 2

A PTFE-reinforced grease for winch gears: lower friction and smooth engagement under load, with the same water resistance as the Marine Grease. Used with WPO 23, grease the gears and oil the pawls.

Technical data

NLGI grade
2
PTFE
Yes
Water resistance
Excellent
Friction
Low (PTFE)

MOL-BL-00001

BlueSyn WPO 23 winch pawl oil on a teak deck beside a winch
OilAvailable

WPO 23 Winch Pawl Oil

Light low-viscosity pawl oil

A light, low-viscosity oil for winch pawls and springs. Keeps pawls returning cleanly without the sticky residue that slows engagement or causes slip, and leaves a light anti-corrosion film against salt spray and washdowns.

Technical data

Viscosity
Low, fast-acting film
Corrosion protection
Light protective film
Application
Winch pawls & springs

MOL-BL-00002

Application guide

A lubrication map of a typical yacht.

From the bow roller to the masthead winches, and ashore on the trailer.

#Lubrication pointRecommended product
1Bow roller, windlass & anchor gearMarine Grease
2Headsail furler & forestay rigging screwMarine Grease · Galvarmor (screw)
3Genoa cars, tracks, blocks & sheavesWPO 23 (moving) · Marine Grease (bearings)
4Shroud rigging screws & chainplatesGalvarmor
5Mast base & halyard winchesWinch Grease (gears) · WPO 23 (pawls)
6Primary sheet winchesWinch Grease (gears) · WPO 23 (pawls)
7Steering, rudder bearings & stern gearMarine Grease
8Cleats, shackles, terminals & fastenersGalvarmor
AshoreTrailer wheel bearings, winch & hitchMarine Grease

Indicative suitability

Which grade for which duty.

An at-a-glance guide to what each product does best. Full datasheet values are available on request.

PropertyGalvarmorMarine GreaseMarine Grease ProWinch GreaseWPO 23
Anti-galvanic (dissimilar metals)++————
Water wash-out resistance+++++++++
Corrosion protection+++++++++
Adhesion / stays put++++++++—
Low friction (PTFE)++——++—
Load-carrying capacity+++++++—
Fast-acting / penetrating film————++

++ excellent / strongly suited  ·  + good / supporting function  ·  — not a primary function. Indicative application guide for the leisure marine range, not an independently validated performance ranking.

Where to buy

Where to buy BlueSyn.

Buy online from Lubricants Hub, our own UK store. If your chandlery does not stock BlueSyn yet, ask them, or contact us directly for trade supply.

Buy online

Lubricants Hub

Galvarmor, Marine Grease and WPO 23 ship from our UK warehouse.

Shop BlueSyn

Chandlers & retailers

Become a stockist

Trade terms and point-of-sale support are available to chandlers and marine retailers.

Stockist enquiry

Specification & ordering

Trade & wholesale

BlueSyn is supplied to marine retailers, chandlers and watersports outlets across consumer and B2B channels. Pricing and minimum order quantities are confirmed on application.

Request trade pricing
MOLEVION

Order & enquiries

Company
IGNIS Overseas Ltd
Address
480 London Road, Office 28,
Isleworth, TW7 4RL
Email
support@molevion.com
Web
molevion.com
VAT
GB 511130559
CRN
13434452